In this guide, we’ll walk you through building an ultra-efficient, five-story modular storage solution in Timberborn. This design maximizes space while maintaining accessibility, offering a six-tile by n-tile footprint with an astounding 3,200-item capacity. Follow along as we break it down layer by layer, covering dynamite excavation, structural placement, stair alignment, and optional decorative elements.

---

Preparing the Foundation: Dynamite Excavation

To begin, you’ll need to dynamite a hole to fit the foundation of your storage system. Follow these steps precisely:

1. Place a section of path for reference.
2. Count four tiles, then place another path section.
3. Use Double Dynamite (or two layers of Single Dynamite if Double isn’t available).
4. Mark a 3×6 section on either side of the central path.
5. Skip one tile, then mark another 3×6 section.
6. Use Single Dynamite at specific spots to create a staggered pattern (S-shape for visual reference).
7. Return to Double Dynamite, filling the remaining middle sections.
8. Detonate the dynamite to complete the excavation.

---

Layer-by-Layer Construction

Now that the foundation is ready, let’s start stacking the storage layers from the bottom up. Each layer follows a simple, repetitive structure that ensures easy replication and modularity.

Layer 1 (Bottom Layer)

• Place 4 Large Industrial Piles in the hole.
• Add two staircases following the Inside-Outside rule:
  • Inside: One staircase facing inward.
  • Outside: Another staircase facing outward.
• Connect the paths in an I-shape layout.

Layer 2

• Add 4 more Large Industrial Piles.
• Place staircases on the outside.
• Use platforms to fill gaps.
• Repeat the I-shape path layout.

Layer 3

• Repeat the storage pile placement.
• This time, staircases are placed on the inside.
• Fill the gaps with platforms.
• Lay down the I-shape path once again.

Layer 4

• Stack the next set of Large Industrial Piles.
• Position staircases on the outside.
• Fill gaps with platforms.
• Apply the familiar I-shaped path pattern.

Layer 5 (Final Layer)

• Cover the middle holes with Triple Platforms and Double Platforms.
• Place staircases back on the inside.
• Lay the final I-shape path.
• Add 4 Large Industrial Piles to complete the structure.

---

Modular Expansion & Connectivity

One of the biggest advantages of this design is its modular nature. You can place multiple units side by side, either horizontally (sideways) or vertically (front to back). Since the structure has a straight ground-level path through the center, no additional pathways are required for connectivity.

---

Decoration & Aesthetic Enhancements

If you want to enhance the visual appeal of your storage unit, here are some simple modifications:

• Basic Roof Design: Add three standard roofs on each side for a simple, polished look.
• High-Roof Design:
  • Use High Roofs (two-part) with 2×1 Roofs at the top.
  • Add Level 2 Platforms on staircases.
  • Use Single Platforms to fill gaps, then add an additional roof section.
• Storage Maximization Variant:
  • Replace the top level with Large Warehouses for even higher storage capacity.
  • Flip them for optimal placement.
  • Apply a roofing system for a refined finish.
• Blended Storage Option:
  • Mix Industrial Piles (bottom layers) with Medium Warehouses.
  • Use Double Platforms along the sides for more integration.
  • Decorate with shrubbery, statues, or benches.

---

Final Thoughts & Customization Options

This five-story storage unit is one of the most efficient ways to store large quantities of materials while maintaining a compact footprint. Its flexibility allows for endless variations, making it ideal for any district layout. You can:

• Expand storage horizontally or vertically.
• Adjust for Medium Warehouses if you need smaller-scale solutions.
• Customize with decorations to fit your colony’s aesthetic.

If you found this guide helpful, consider experimenting with the design to make it your own! Let us know if you have any creative variations or optimizations to share.

Happy building!