Overview: “A Wet Affair” is a lengthy and precision-heavy mission in Teardown that requires you to secure multiple safes from the rain by relocating them using a mix of cranes, trucks, and creative solutions. There are many viable strategies, but this guide will walk you through a consistent and reliable approach designed for successful execution more than record-breaking speed.

---

Preparation Phase:

1. Start with the Crane and First Safe:
   • Use the crane located near the start to remove the third-floor safe.
   • Create a hole in the wall with rockets or pipe bombs.
   • Carefully bring the crane underneath the walkway and align it with the safe.
   • Use controlled bombs to blast the safe through all floors to ground level.
   • Hook the safe and pull it underneath cover. Leave it for now.
2. Use the Truck for Multi-Safe Transport:
   • Drive the flatbed truck to the area with two easy-to-carry safes.
   • Pick them up by holding still and letting the safe float upward, then drop into the truck.
   • Plank the safes securely using 4-5 planks each to prevent sliding during transport.
3. Garage Destruction Route:
   • Rather than reversing, smash straight through the garage with your truck.
   • Clear debris and fire with your extinguisher.
   • Quick save before you navigate out.
4. Add a Third Safe to the Truck:
   • Detour to the Ferris Bueller-style garage.
   • Carefully blast your way in, grab the safe and quickly plank it into the truck bed.
   • Drive slowly to avoid losing any safes.
5. Prep the Villa Flatbed Drop-Off:
   • At the villa, align your flatbed under the third-floor safe.
   • Blow the walls and ceiling around the safe.
   • Drop it onto the flatbed and secure with planks or cover it with a roof of wood.
   • Drive this truck near the crane area.
6. Final Safe – Villa Garage:
   • Drive your main truck to the final villa.
   • Blast the garage open.
   • Place the last safe in and secure with planks.

---

Execution Phase:

• Position the crane-safe truck and both transport trucks near water.
• Ensure each safe is well planked and cannot fall prematurely.
• Line up your escape path and quick save.
• Trigger the alarm by moving any safe into the rain.
• Drive each vehicle into the water efficiently:
  • Flatbed into lake.
  • Main truck in reverse.
  • Drop remaining safes with controlled turns.

---

Tips and Optimization:

• Use quick saves liberally.
• Avoid reversing with trailers if uncomfortable.
• Make wide turns around trees to avoid damaging trucks.
• Blow out all metal or obstructing debris.
• Don’t hesitate to go back and redo a section if the rain triggers too early.

---

Conclusion:

While “A Wet Affair” is among the most time-consuming and prep-heavy missions in Teardown, with enough preparation and patience, it’s easily manageable. The use of planks, smart truck routing, and knowing when to cut corners (literally) will get you through efficiently. This route is tailored for a reliable finish with time to spare, especially on your first successful attempt.

Good luck, and happy tearing!