This mission takes a sharp turn from your typical Teardown objective. There’s no high-speed heist or explosive getaway — instead, you’re playing delivery driver for a tangle of antenna wires. At first glance, it’s confusing, and honestly a bit off-putting. But once you realize the goal and how forgiving the system is, it turns into one of the fastest and most manageable missions in the game.

Here’s how to get it done with minimal fuss and no unnecessary stress.

---

Objective: Connect the Van to All Antennas

You’re tasked with moving a van so that it connects (via attached wires) to a series of antenna nodes scattered across the area. Each node is wired with an alarm that trips once you begin pulling on the cables.

Once all connections are made and the alarms are active, you just need to make it back to your escape van before time runs out.

Sounds messy, right? It’s really not.

---

Step-by-Step Strategy

1. Prep the First Connection Zone

• Drive the mission van (the one that connects to the antennas) into a central position that aligns well with the first three antenna towers.
• Use pipe bombs or explosives to blow open doors and clear obstructions.
• Clear space around the van and buildings — even the scaffolding or vehicles that might snag the cable.

2. Create Clear Lines of Sight

• Blow out parts of nearby buildings that might interfere with wires.
• In the structure with the second-floor antenna, blast a hole near the base to allow easier wire routing.
• Get rid of walls or clutter between the van and any antenna you’ll cable.

3. Manage Your Wires Efficiently

• Bring the cables into the van manually.
• Try not to overstretch or route around sharp corners — wires have tension and can resist odd angles.
• For a distant antenna: blow the antenna down if needed (yes, really), and route it closer.

4. Setting Up the Final Connection

• Use another vehicle — preferably a low-center 4×4 — to attach one of the cables from a nearby antenna.
• Face it the correct direction for a clean wire path.
• Don’t overthink this part — the cables will follow reasonably well once attached.

5. Triggering the Alarm and Finishing

• The moment you attach the final cable, the alarm starts.
• From there, you have limited time to get to your Escape van.
• You can run, or if you’re feeling bold, have a vehicle parked and ready for the sprint.

Even walking is fast enough to complete this — especially if you’ve cleared all routes.

---

Pro Tips

• Quick Save after placing the van and clearing the area. You’ll want a fallback.
• The fire alarm can be triggered if you’re too reckless with explosives, so extinguish fires quickly.
• Watch for cable physics — pulling too sharply around objects or trying to thread through walls can cause detachment.

---

Final Thoughts

This mission may feel odd at first — it lacks the chaos of the traditional Teardown formula — but it’s a smart change of pace. The goal is strategic routing, not destruction.

And, honestly? It’s fun in its own weird way. No loot to grab, no getaway path to perfect — just you, a van, and a big ol’ tangle of cables.

Mission time? Under five minutes. It’s a short one — but refreshingly different.

Ready to pull some wires? Let’s go.